faq

FAQs

Here are some Appliance Maintenance & Repairs  frequently questions.

Why my Refrigerator is not cooling?

There is few things that could go wrong for fridge not cooling. Here is the two most common cause. 1.) Evaporator Fan Motor which circulate the cool air. 2. ) Condenser Fan Motor which draws air through the coil n over the compressor.

My clothes come out wet after finishing the dryer cycle

It s probably the Thermal Fuse that is design to protect the dryer from overheating. Hence its good to check both heater assembly and the fuse for not heating issue.

Dishwasher not cleaning dishes. What is the fix?

Dishes not cleaning properly could be cause by various reason. Anything that is related to water supply to water pumping to water splashing components. A professional help is recommended.

Why my fridge not defrosting?

 Defrost Timer dictate the defrost heater to activate through out the day to melt any frost that get accumulated on the coils. A bad defrost timer stops that defrosting process. Need to replace the defrost timer to fix this issue.

My Washer wont drain, How to fix it?

DRAIN PUMP – Yes as the name implies. Washer over the course of age does get caught small articles clothes in the drain pump. Remove the pump and check for obstruction. clean n clear any articles of it. Might even need replacing the pump if its faulty. 

Why my Stove burner wont’ light?

Spark Module and Spark Ignition Switch are two component that governs the burner ignition. It require professional to diagnose the part n replacement.

Stove is working fine but oven is not working. 

Check if bake element is glowing red or not. Look for any holes or blisters. Element are not repairable. To determine if the bake element has burned out, use a multi-meter to test the element for continuity. If the bake element does not have continuity, replace it..

My Washer won’t spin or agitate, help please

These are few common cause of washer not agitating

  • Drive Belt – Inspect the belt to check if its broken or just off the pulley. Put it back if its jst came of the pulley. Or repalce it its crack or loose. 

Didn’t find your answer?

Our friendly customer support team can help you.