Is your dishwasher refusing to drain? Hopefully you spotted this fault before you tried to run another load, otherwise you’re looking at some serious flood damage.
In either case, Quick Fix can help. Whether you’re looking to book a professional Kenmore dishwasher service, or would like to inform your own DIY repair attempt, the following post will help. You can call 1-888-549-6777 to speak with a Kenmore dishwasher service expert, or read on for a step-by-step instructional.
As you approach your DIY Kenmore dishwasher service attempt, you may feel a little trepidation. After all, there are so many makes and models out there; what if you’re following the wrong guide and only end up making things worse?
Don’t worry. The good news is that dishwasher technology hasn’t changed much in the past decade or so, and most models function in the same basic way. Though certain models may offer fancy (and delicate!) features accessed through an electronic interface, our focus today is on mechanical functionality, so you can rest easy knowing the advice you’re getting is good!
Before you get wrist-deep in dishwasher parts, check if your drain is clogged. Peer into the garbage compactor or unscrew the pipe running beneath it to see if there are any food blockages. If there are, you may have solved your problem. Knock out the blockage and see if your problem stops.
If the drains and pipes look clear, it’s time to delve deeper into your dishwasher. Remove the racks. The top rack may be held in place by a small clip on the left and right sides. Remove these with a screwdriver or butter knife and the rack should slide out.
Before you start removing screws, lay a dishcloth down along the bottom of your dishwasher compartment. This will save you a lot of hassle that would arise if you dropped a screw or two into the bottom.
Remove the screws in the back and top of your dishwasher.
The lower sprayer comes out by unscrewing the middle screw. Once removed, you’ll be able to lift the top cover away. You should have 4 more screws to remove. Typically, 3 are visible, and 1 will be hidden by the sprayer arm. When removing the sprayer arm, be sure to keep the plastic O-ring set aside for later. Don’t lose it!
With the arm and the screw it was hiding removed, the plug and filter should lift right out. From here, you should be able to spot any issues. Quite often, our Kenmore dishwasher service experts will report a label, price tag, or sticker obstructing the drain.
Did your DIY attempt go awry? Call 1-888-549-6777 for a free quote from our team!